HO) Example(s) of the use of the DESL
register command.
register clear *N1 *V6 *V7 *N9
This execution of "register" will reset "name" registers
*N1 and *N9 and will reset "value" registers *V6 and *V7.
reg show
This execution of "register" will cause a display of the current
settings of ALL User and System registers.
register set *V6 = 35.4
This execution of "register" will set a value into the *V6
User register of 35.4.
register set *V1 = 33.4 + *V13
This execution of "register" will set a value into the *V1
User register = to the value contained in the *V13 System
register + 33.4.
reg set *N1 = *N1 sfx 1
This execution of "register" will set into User register *N1
a string which will be produced by appending ( up to the 16
character limit) the string 1 to the contents of register
*N1.
reg set *V4 = sind 48.2
This execution of "register" will set into User register *V4
a value equal to the sine of 48.2 degrees.
DESL Manager at ViGYAN, Inc.
30 Research Drive
Hampton, VA 23666
Voice: (757) 865-1400
Toll Free: (800) 288-3998
FAX: (757) 865-8177
